Automatic Binding Machine B599

How it works

When not connected to a punching unit, the machine is fed with pre-punched and ganthered products with the covers on the bottom and the punched side downwards. The book  is transported in the insertion area where it mets diagonal bar on which the spiral run and is cut. This way the first ring of the spiral slips into the first hole of the book, and the actual movement of the book itself facilitates the insertion of the whole length. The spiral is then turned 90” in a special patented tunnel and finally closed under specific pressing unit.

This binding system is recognised as the simplest and most natural , due to the way paper is handlied, allowing considerable speeds and simplicity even throughout the changing operations and associated fine tunings.

• Uses WireBind Rilematic® Wire on spools with diameters from 1/4" to 1" for maximum binding thickness of  23 mm.
• (Check thickness reference table for details)
• Maximum Binding Size: 450 x 500 mm. (18" x 20")
• Minimum Binding Size: 100 x 80 mm. (4" x 3")
• Specific tools for each closing diameter
• Max  speed: up to 4000 cycles per hour
• Actual speed according to the product’s technical characteristics and work organisation
• Twin Spool unwider to reduce time wasting during spool changes
• Programmed binding with on one part of spiral or “skip” up to five spiral parts

Optionals:

• Size tool sets: 1/4" to 1".

Technical Specifications:

• Power supply: 400 V three phase 50/60 Hz +N
• Power drive: 2 Kw
• Compressed air supply: 8 Atm - 5mc/hour
• Size: 4500 x 1400 x 1600 mm
• Weight: 1250 Kg